DAVIS Weather Talker Specifications Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 191
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
Quick Start
13
Humidity
To adjust humidity offsets, do the following:
1. On the Weather Display main window, click Control Panel.
2. Under Station Settings, click Offsets & Initial Rain.
3. Under Humidity Offset, select the check boxes for the options you want.
Note•••For the WMR-968 you should select the Set 98% as 100% check box and enter a
and Slope factor of 1.
Barometer
For the barometer, Weather Display uses the raw pressure value from your weather station.
You need to set a pressure offset. This number is in hPa. There is a conversion for US units
(inches). The offset is absolute. For example, if you want to adjust the barometer, and you
want the pressure to increase by 1 hPa, then the offset must be 1 hPa higher.
You need to set the offset until the pressure shown in Weather Display matches the Mean
Sea Level Pressure (MSLP) for your location at that point in time. You can find the MSLP
from a nearby Weather Service facility or airport. Some local newspapers might also have
this information. You might need to fine tune over a period of time; your pressure reading
needs to be similar to your nearest official weather station at the same time of day„ideally
done in light winds/clear weather when there is a large high pressure covering in your area.
External links
[1] €http:/ / www. weather-display. com
Source: http:/ / wiki. weather- watch. com/ index. php? title=Quick_ Start&oldid=2022
Principal Authors: ANONIPEDITS:0
Daily reset Time
Purpose•••To ensure your station's observations conform with international agreements for
start and end of the day.
Daily reset
You can choose either a 12 Midnight reset (default) or 9 a.m. reset (used in Australia, New
Zealand ,and a number of other countries). The Norwegian Meteorological Institute uses
06:00 UTC to reset rain and 18:00 UTC for temperature and wind.
Under the Setup, click Values Reset Time.
At either 12 Midnight or 9 a.m., the daily high/low data will be reset, as well as, yesterday's
rain total.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 190 191

Comments to this Manuals

No comments