Davis Wireless Temperature Station User Manual download pdf (Page 4)

Page 4 Wireless Temperature Station

ETTING

THE

RANSMITTER

Each wireless transmitting station must be set to one of eight transmitter IDs.

DIP switches #1, 2 and 3 on the SIM allow you to control the ID — the “chan-

nel” the station will transmit on. (DIP switch #4 is used for transmission test-

ing, not for transmitter ID.)

The transmitter and receiver communicate with each other only when

both

are set to

the same ID.

The factory default transmitter ID is ‘1’. Looking at the table below, you can see

that means the DIP switches are in the OFF position when each transmitting

station leaves the factory, whether it is an ISS, a wireless temperature station, or

another kind of station.

The ISS is included with every Wireless Vantage Pro, so the console/receiver is

set to ﬁnd the ISS on ‘1’.

Set your temperature station to its own ID number.

Use a ballpoint pen or paper clip to toggle DIP switches #1, 2, and 3.

The set-

tings for transmitter IDs 1 – 8 are shown in the table below:

Use this table to ensure that each wireless transmitting station in your system is

broadcasting on its own transmitter ID.

DIP S

WITCHES

RIGHT

ORNER

SIM (I

LLUSTRATION

HAS

BEEN

ENLARGED

FOR

CLARITY

)

ID C

ODE

WITCH

(default)

off off off

#2 off off ON

#3 off ON off

#4 off ON ON

#5 ON off off

#6 ON off ON

#7 ON ON off

#8 ON ON ON

1234

Battery Holder

DIP Switches

Wireless Temp Page 4 Thursday, December 7, 2000 2:09 PM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Davis Wireless Temperature Station User Manual Page 4

Comments to this Manuals

Related products and manuals for Thermometers Davis Wireless Temperature Station