DAVIS DriveRight 156VSS User's Guide download pdf (Page 10)

Page 6

Changing Units of Measure

To change units of measure, press and hold SET/CLEAR for

at least 2 seconds while viewing the Current Readings

screen. You may also change units from the Limit and Units

Settings screen by pressing SET/CLEAR unit either the km/h

or MPH segment is ﬂashing, and then pressing PLUS to tog-

gle between the two units of measure.

You may change the date display format from the Date

Entry screen and the time display format from the Time

Entry screen

ALIBRATING

THE

RIP

500AL

You must calibrate the unit before it will report the correct

speed distance, deceleration, and acceleration. Calibration

adjusts the unit to work properly with your vehicle’s VSS sig-

nal or with the vehicle’s differential and tire size.

Calibrating from the Software (VSS Only)

If you have the DriveRight Vehicle Management Software

and a VSS Trip 500AL, you may quickly and accurately cali-

brate the unit using the software, provided you know the

pulses per mile used by your vehicle’s VSS (vehicle speed

sensor). Contact your dealer’s service department for the

necessary information.

1. Install the DriveRight Vehicle Management Software.

2. Connect the Trip 500AL to your computer.

Consult the documentation supplied with the software

for instructions.

3. Start the DriveRight Vehicle Management Software.

4. Choose Set DriveRight from the DriveRight menu.

The Set DriveRight dialog box opens. You will see a VSS

Pulse button within this dialog box.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

DAVIS DriveRight 156VSS User's Guide Page 10