DAVIS DriveRight 156VSS User's Guide download pdf (Page 23)

Page 19

You have the following options from the Trip Acceleration/

Deceleration Log Screen:

❏ Toggle Between Driver ID Code and Date Dis-

play

You may display either the current driver ID

code or the date. To toggle between the two,

press and release SET/CLEAR.

❏ Page Through Stored Trip Information

Press MINUS to page backward through stored

trip information. Press PLUS to page forward

through stored trip information. Hold the but-

ton down to increase the speed at which the

Trip 500AL pages. When you reach the ﬁrst or

last stored trip, the Trip 500AL will no longer

page in that direction.

Odometer Screen

The Odometer screen displays the vehicle’s odometer reading

and the next service alarm mileage, both of which must be set

from the DriveRight Vehicle Management Software. The

odometer reading is spread across the two digit registers at the

bottom of the screen and may take some getting used to (the

odometer reading in the screen shown below is 5,812.2 km).

The displayed service alarm mileage must be multiplied by

1000 to determine the mileage at which service is next

required for the vehicle (in the example below, service is next

required at 6,000 km).

Odometer Screen

NOTE: The odometer readings is ALWAYS shown in the unit of measure

in which it was entered. To change the unit of measure in which

it is displayed, you need to reenter the odometer reading using

the software.

DISTANCE

Next Service Alarm Mileage (6,000 km)

Odometer Reading (5,812.2 km)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

No comments

DAVIS DriveRight 156VSS User's Guide Page 23