DAVIS and Vantage Pro Troubleshooting Guide download pdf (Page 47)

Console Maintenance



8. Number of times the console lost communications with the transmitter for

more than 10 minutes.

9. Current number of consecutive misses. The counter increments when the

console is synchronized but the packet is not.

10. Longest streak of consecutive packets received.

11. Current streak of consecutive packets received.

12. Current console battery voltage

13. Receiver Gain Status

14. Graph of last 24 days’ percentage of scheduled ISS data packets.

Console Firmware Versions

In some cases the problem may be that your console firmware doesn’t sup-

port what you are trying to do. Use this command to determine the firmware

revision level in your console. You can find more information on Vantage Pro

console firmware versions and changes in the Weather Software Support

section of our website. See “Contacting Davis Technical Support” on

page 44 for information.

Press and hold the DONE key then press the + key to display the console

firmware version in the ticker at the bottom of the screen.

Console Maintenance

Changing Batteries

Use this procedure to change console batteries without loosing any stored

weather data or console configuration settings.

1. Plug in the AC adapter

2. Enter Setup Mode by pressing the DONE and - keys.

Entering Setup Mode makes sure the station isn’t writing any data to

memory when you remove power.

3. Remove the battery cover located on the back of the console by pressing

down on the two latches at the top of the cover

4. Place the console face down on a flat, firm surface.

5. Insert a fingertip between the two exposed batteries then press the middle

battery down toward the notch (toward the “hidden” battery). This will

relieve tension on the first battery and allow you to remove it

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

No comments

DAVIS and Vantage Pro Troubleshooting Guide Page 47