DAVIS Weather Talker Specifications download pdf (Page 37)

Setting up to use TAPR

TAPR (Tucson Amateur Packet Radio) http:/ / www. tapr. net/ has a number of 1-wire

weather sensor kits available: X1W-1, X1W-4, X1W-4 and T-238+MODEM2, which provide

temperaure, humidity, barometer, radiation, lightning and rain sensors or interfaces thru

the Dallas 1-wire system.

Programming X1W-1 Barometer

1) In W-D, select "Control Panel", "Dallas 1-wire" then "Main/save setup". 2) Select the

ROM-id for the Barometer and copy it to the clip-board. 3) Move to "Barometer setup" 4)

Paste the Barometer ROM-id in the "Bray-Jennings Barometer ROM-id" space. 5) Check off

"I have a barometer (Bray-Jennings or AAG)". 6) Fill in the blanks (see drawing):

a) High Baro = 31.60

b) Low Baro = 25.69

c) High Voltage = 9.75

d) Low Voltage = 1.75

7) Click "Set". 8) Return to "Main/save setup" and click "save/reset" and "Close". 9) After

about a five minute delay, the barometer will start.

Source: http:/ / wiki. weather- watch. com/ index. php? title=Setting_ up_ to_ use_

TAPR&oldid=2491

Principal Authors: ANONIPEDITS:0

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 190 191

No comments

DAVIS Weather Talker Specifications Page 37