Davis Health EnviroMonitor: Console User Manual download pdf (Page 22)

Using the Health EM

Page 30 Health EnviroMonitor Manual

2. To display the status of the AutoClear function for the high solar radiation intensity,

press SUN again.

If the AutoClear function is enabled, the word On appears on the right of

the display. If the AutoClear function is disabled, the word OFF appears

on the right of the display. (See “Enabling/Disabling AutoClear” on page 46

for instructions.)

3. Continuing to press SUN will alternate between the two solar radiation displays.

High Solar Radiation Intensity

The Health EM displays the high solar radiation intensity along with the time

at which it occurred. For information on displaying and clearing highs and

lows, see “Highs and Lows” starting on page 40.

BAROMETRIC PRESSURE

The Health EM displays current barometric pressure in inches of Hg (in), milli-

meters of Hg (mm), and hectoPascals (hPa).

Barometric Trend Indicator

The barometric trend indicator, which appears on the bottom right hand corner

of the display, gives you a visual indication of whether barometric pressure is

steady, rising, or falling. The barometric trend indicator updates approximately

every 15 minutes.

• Steady Barometric Pressure

If barometric pressure changed by less than .02 inches of Hg (1.5 mm or

.7 hPa) over the past hour, the steady barometric pressure indicator

appears.

STEADY BAROMETRIC PRESSURE INDICATOR

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

Davis Health EnviroMonitor: Console User Manual Page 22