Davis Health EnviroMonitor: Console User Manual download pdf (Page 35)

Alarms

Health EnviroMonitor Manual Page 43

3. To display the low alarm threshold for a weather condition with two alarms press

ALARM again.

The threshold for the low alarm appears.

4. Press any function key to exit.

Setting a Normal Alarm Threshold

Follow the procedure below for instructions on setting a standard high or low

alarm threshold. Speciﬁc instructions for setting the barometric pressure and

dew-point alarm are explained separately below.

1. Press the appropriate key(s) to display the desired weather condition.

2. Press ALARM as necessary to display the desired alarm threshold.

3. Use ENTER to set the alarm.

4. Press any function key to save and exit.

Example of Setting an Alarm Threshold: Low Outside Temperature Alarm

This example shows you how to set the Health EM’s low outside temperature

alarm to 32˚F.

1. Press TEMP as necessary to display outside temperature.

OUTSIDE TEMPERATURE

2. Press UNITS as necessary to select ˚F.

3. Press ALARM twice to display the low alarm threshold.

The high alarm threshold appears ﬁrst, then the low alarm threshold.

OUTSIDE TEMPERATURE LOW ALARM THRESHOLD (NO SETTING)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

No comments

Davis Health EnviroMonitor: Console User Manual Page 35