DAVIS Weather Monitor II Troubleshooting Guide download pdf (Page 24)

Using the Weather Functions

Page 20 Weather Monitor II

To Display Current Temperatures

1. To display inside temperature, press TEMP.

The inside temperature reading and the word INSIDE appear on the display.

2. To display outside temperature, press TEMP again.

The outside temperature reading and the word OUTSIDE appear on the display.

INSIDE AND OUTSIDE TEMPERATURE DISPLAYS

To Change the Unit of Measure

1. Press TEMP once or twice to select inside or outside temperature, as desired.

2. Press UNITS until the desired unit of measure and resolution (1˚F, 0.1˚F, 1˚C, 0.1˚C)

appear in the display.

To Display High and Low Temperatures

1. Press TEMP once or twice to select inside or outside temperature, as desired.

2. Press UNITS to select ˚F or ˚C as desired.

3. Press RECL to display the high.

After a few seconds, the display will show the time the high was recorded, and

then the date it was recorded.

4. Press RECL again to display the low.

After a few seconds, the display will show the time the low was recorded, and

then the date it was recorded.

5. Press any key to exit.

HIGH AND LOW TEMPERATURE DISPLAYS

To Clear High and Low Temperatures

1. Press TEMP once or twice to select inside or outside temperature, as desired.

2. Press RECL once or twice to select the high or low temperature, as desired.

MPH

INSIDE

BAROMETRIC

TREND

TEMPERATURE

Inside Temperature: 24˚COutside Temperature: 68.7˚F

MPH

OUTSIDE

BAROMETRIC

TREND

TEMPERATURE

MPH

OUTSIDELOW

BAROMETRIC

TREND

TEMPERATURE

High Inside Temperature: 27.2˚C Low Outside Temperature: 44˚F

MPH

INSIDE

HIGH

BAROMETRIC

TREND

TEMPERATURE

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Comments to this Manuals

No comments

DAVIS Weather Monitor II Troubleshooting Guide Page 24

Comments to this Manuals

Related products and manuals for TVs & monitors DAVIS Weather Monitor II