DAVIS Weather Monitor II Troubleshooting Guide download pdf (Page 45)

Humidity Tips

Weather Monitor II Page 41

HUMIDITY TIPS

Inside humidity seems too high or low

• Make sure the console is not near a humidiﬁer or de-humidiﬁer.

• Check calibration number and adjust if necessary.

WIND TIPS

Wind speed reading seems lower than expected

• Check installation by spinning wing cups. If you get a reading, the wind

cups are installed correctly. Wind speed reads 0 either all the time or inter-

mittently

• Make sure anemometer cable is plugged into jack marked WIND on junc-

tion box.

• Check for broken wire along length of anemometer cable. Carefully check

areas where the cable has been secured.

• If you still do not get a reading, the problem is probably with the anemome-

ter. Call factory for return authorization.

Wind speed reading seems too high or too low

• Check calibration number and adjust if necessary.

Wind direction reading is dashed out

• Make sure anemometer cable is plugged into jack marked WIND on junc-

tion box.

• Check for broken wire along length of anemometer cable. Check the areas

where the cable has been secured carefully.

• If these steps do not reveal the problem, the problem is probably with the

anemometer. Call the factory for return authorization.

WIND CHILL TIPS

Wind chill reading seems too high or too low

• Check calibration number for temperature and wind speed. Adjust if neces-

sary.

1 2 ... 40 41 42 43 44 45 46 47 48

No comments

DAVIS Weather Monitor II Troubleshooting Guide Page 45