DAVIS Health EnviroMonitor User Manual download pdf (Page 18)

Using the Health EM

Page 26 Health EnviroMonitor Manual

Low Wind Chill

The Health EM displays the low wind chill along with the time at which it

occurred. For information on displaying and clearing highs and lows, see

“Highs and Lows” starting on page 40.

Alarms

You may set a low alarm for wind chill. (See “Alarms” on page 42.)

OUTSIDE AND INSIDE TEMPERATURE

The Health EM displays the current outside and inside temperature. In addi-

tion, you may view the high and low outside and inside temperatures along

with the time at which they occurred. You may display outside and inside tem-

perature in ˚F or ˚C and at a resolution of either 0.1˚ or 1˚.

Viewing Temperature

1. To display the current outside temperature, press TEMP.

The current outside temperature appears on the right of the display.

CURRENT OUTSIDE TEMPERATURE

2. To display the current inside temperature, press TEMP again.

The current inside temperature appears on the right of the display.

CURRENT INSIDE TEMPERATURE

3. To display the status of the AutoClear function for high and low outside and inside

temperature, press TEMP again.

If the AutoClear function is enabled, the word On appears on the right of

the display. If the AutoClear function is disabled, the word OFF appears

on the right of the display. (See “Enabling/Disabling AutoClear” on page 46

for instructions.)

Note: You cannot enable/disable the AutoClear function separately for outside and inside temperature.

These two functions are “linked” and AutoClear for them must be either enabled or disabled

together.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

No comments

DAVIS Health EnviroMonitor User Manual Page 18