DAVIS Health EnviroMonitor User Manual download pdf (Page 27)

Relative Humidity

Health EnviroMonitor Manual Page 35

High Rate of Rainfall

The Health EM displays the high rate of rainfall along with the time at which it

occurred. For information on displaying and clearing highs and lows, see

“Highs and Lows” starting on page 40.

Clearing Daily and Total Rainfall

You may clear daily and/or total rainfall at any time to begin a new total.

Note: The daily and total rainfall values must be cleared separately.

1. Press RAIN as necessary to display either daily or total rainfall.

2. Press and hold down CLEAR until the rainfall total resets to zero.

TOTAL RAINFALL CLEARED

Note: To prevent accidental clearing of the total rainfall, you need to hold CLEAR down for 7 seconds

before total rainfall clears. Daily rainfall clears after only 3 seconds.

Alarms

You may set a high alarm for daily rainfall. (See “Alarms” on page 42.)

RELATIVE HUMIDITY

The Health EM displays the current outside and inside humidity and the cur-

rent dew-point. In addition, you may view the high and low outside and inside

humidity along with the time at which they occurred. You may display dew-

point in either ˚F or ˚C.

Viewing Humidity

1. To display the current outside humidity, press HUM.

The current outside humidity appears on the right of the display.

CURRENT OUTSIDE HUMIDITY

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

No comments

DAVIS Health EnviroMonitor User Manual Page 27