DAVIS 7627 Installation Manual download pdf (Page 34)

Installing the Repeater on a Pole

Refer to the following illustration to install the repeater on a pole:

1. While holding the shelter against the pole, place a U-bolt around the pole and through

the two holes on at the top of the shelter.

2. Place a flat washer, a lock washer and a hex nut on each of the bolt ends.

3. Using an adjustable wrench or 7/16" wrench, tighten the nuts.

4. Place the second U-bolt around the pole and through the two holes at the bottom of the

shelter.

5. Put a flat washer, a lock washer, and a hex nut on each bolt end, and tighten the hex

nuts.

Flat

Washer

Lock

Washer

Hex

Nut

U-Bolt

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

No comments

DAVIS 7627 Installation Manual Page 34